first install on rx7, increased power, improved automatic shifting, improved emissions, smell, and mpg. easy to maintain, just add water. using koh catalist. have another install when return for service. thanks one and all for sharing and viewing.
Just a cube that indicates what I'm missing on IRC. Red, green and blue range from 1-255. Blue's value is determined by the number of channel messages missed squared. Green pulses once when there is a new channel message, and red pulses repetitively when there is a new private message.
24x16 RGB LED Matrix, based on 6 Serial controllable 8x8 RGB Led Matrixes. I've updated the firmware (The matrixes have an atmega8 controller) to allow PWM control of the LEDs. The display is controlled by .NET Micro Framework running on an Embedded Master
Download the new atmega8 firmware en .NET Micro Framework code can be downloaded from:
http://www.microf ramework.nl
VU meter on ATtiny2313 multichannel PWM over DMX512 from PC via USB...
Software used on the PC side is STL-DMX... It converts the music amplitude to an 8bit value...
The PC outputs DMX512 over USB to RS485 (DMX) via an FTDI232 chip...
The differential rs485 signal is received by the ATtiny2313 and the relevant channel data is applied to an 8 channel soft PWM routine...
Developing firmware for 08/09 Student Robotics PWM board. The firmware currently sweeps all the servo rails back and forth between extremes. Later I will add I2C support so that they are controlled by the slug (NSLU2).
